First, grasp the planning principles of water systems
(A) Qushui love, surrounded by
According to the basic principles of building feng shui, water is the top of the curve, Qushui has the effect of gathering gas, and the energy gathered by the water from the DC will be weakened. Qushui is also divided in which direction of the Qushui. In general, it is on the inner bend of the water, and on the opposite side of the inner bend, it is not lucky. Therefore, in the planning of the water system in the park, the building should be planned at the inner ring of the water system to form a feng shui effect with the so-called jade belt wrapped around the waist.
(b) Water system is better
Dynamic water energy will be stronger. Dynamic water may include: flowing water, water spray, falling water, gushing water, etc. These types of water can be used. The surface area occupied by flowing water is relatively large, and the affected area is also relatively large. Therefore, it is necessary to surround the building as the upper part; Water and gushing water occupy a relatively small area, and the impact is often limited to buildings that are close to it. In principle, the water system should be better in the direction of the building to Xingwang, and the construction of the building should be greatly reduced in the direction of the star's death. Wherever it is, if you go to Xingwang, where is the death of the star, you need to be determined by a professional who needs Feng Shui construction.
II. Planning Principles for Park Roads
In the construction of feng shui, roads are fake waters, and their effects are similar to those of water. Therefore, the planning of roads should follow the planning principles of the above-mentioned flowing water systems. At the same time, special attention should be paid to the fact that roads should not be washed straight into the building. If such situations cannot be avoided, they should be resolved by planting trees and other measures.
Third, grasp the planning principle of rockery
"Master Ding Shui, the owner of the mountain," the mountain has an important role in feng shui. In order to prosperous people, building rockery in the park is a feasible method, but the setting of rockery is also stressful.
(a) orientation
First of all, we must pay attention to the position. The rockery must be in the position of the star of the mountain, such as in the direction of the death of the mountain star, which is counterproductive.
(b) Shape
Secondly, rockery should be mellow and amiable, not to blame stone rakes and sharp corners for rushing, otherwise, it is also more harm than good.
Fourth, grasp the feng shui significance of various sculptures
In modern parks, various sculptures are not uncommon. When planning for sculpture, it is important to pay attention to the application of principles of learning. For example, some parks put horse sculptures in water is very inappropriate, because the horse five elements are fire, placed in the water for fire, water fire, will bring a series of side effects. It is not appropriate to put tigers in the park. Tigers are injured, they hurt, and so on.
V. Maximize the use of trees
Fengshui has been admiring trees because of the fact that trees can be decontaminated and bad feng shui fields are purified. Planting some trees in areas exposed by helium can relieve the effects of helium. Under normal circumstances, planting trees should be good. However, in overcast areas, it is not appropriate to plant too many big trees, otherwise it will increase the yin. In addition, trees growing taller and thicker in front of the building should also be treated with caution. Because tall trunks are easy to fall into place, many buildings are unfavorable.
Sixth, the special argument of rattan plants
In the construction of feng shui, rattan plants are "Teng snakes" and are negative. They are symbols of troubles, troubles, disputes, and mental disorders. Therefore, the use of rattan plants is not advocated. However, because the rattan plants have their unique characteristics of viewing and avoiding yin, people love it. Therefore, if you use it, it is recommended to set it away from the building. It must be avoided in the gloomy shade.
Machining Aluminum
Aluminum machining is the use of CNC machining out, including: drilling, boring, cutting, turning, screw. Product material are: aluminum6061,6061-T6,6063,6083,7075.5052,2017 .In the high-speed machining out of the workpiece has a good finish. Aluminum machining product surface treatment has anode, electroplating, sand blasting, laser engraving LOGO, mechanical drawing, rolling flower, according to the requirements of the drawings on the product anode all kinds of colors such as color, black, red, blue, yellow. We have a special inspection department to carry out inspection, to ensure that each size of products meet the requirements of the drawings, machining aluminum(cnc aluminum) is the most common in mechanical processing, low density, not easy deformation, high precision products. So it is widely used in various industries.
Machining Aluminum,Fluorocarbon Machining Aluminium,Alumiunum Machining,Milling Aluminum
Hong Kong RYH CO., LTD , https://www.cncmachiningpart.com